STEDI Type-X Sport 7 Inch LED Driving Lights

$616.00 Inc Gst

Available on back-order

NOTE: Items on back order may take 8 – 10 weeks


Our Type-X LED Driving Lights are the very best representation of our brands’ spirit and culture. The performance & quality surpasses that of the most respected players in the industry.

Stedi Type-X Sport 7" Dimensions



  • 4mm thick 304 Series Stainless Mounting bracket, which includes rubber dampener and an additional 3mm upper plate.
  • A360.0 Cast Housing | Boasting superior strength and corrosion resistance.
  • 3mm Thick GE Lexan Lens with hard coating | Virtually unbreakable & scratch resistant
  • 100% Polyester UV and abrasion resistant powder coat
  • IP68 | Dust & Particle tight + Water-proof up to 3 meters
  • Nitto Denko Pressure Equalization vent with membrane | Protects against water ingress, dust & contaminants.
  • Environmentally Sealed Deutsch® DT-2 connector
  • EMI & RFI Suppression circuitry – We guarantee it.
  • Each 7″ TYPE-X Sport comprises 32 of OSRAM’s® finest OSLON® LED, selected for its high luminous flux and perfectly matches optical properties.
  • 4 wide-beam reflectors built-in, which form a lateral shaped flood pattern designed to minimize valuable light wasted up to the sky.
  • 5700K CCT offers stunning clarity and definition with excellent Colour Rendering Index (CRI)


LED 32 x Osram Oslon SSL
RAW LUMENS 16,640 (Pair)
TESTED LUMENS 12,820 (Pair)
AMP DRAW 6.4A @ 13.2v (each)
POWER DRAW 85W (each)
CANDELA 819,200cd
BEAM PATTERN 4 x Spread 28 x Spot Beam
INGRESS PROTECTION IP68 | Submersible up to 3m
WEIGHT kg (each)
10 M 8,129 Lx
50 M 327 Lx
200 M 20 Lx
300 M 9 Lx
400 M 5 Lx
895 M 1Lx



  • 2 x STEDI 7″ TYPE-X Sport
  • 2 x STEDI Black Out Covers
  • 1 x Easy Fit High Beam Wiring with DT-2 Sealed Connectors, H4, HB3 Adapter plugs to high beam. 60A Relay, Fuse, Switch
  • 3 Series Stainless Steel Nuts and Bolts
  • Rubber Shock Dampener
  • Wiring Instructions




STEDI was founded in 2013 out of the small 290m2 warehouse in Melbourne, Australia, by founders Eddie & Sandra Yilmaz. Back then, the world of the LED driving light was largely novel. The first-ever round variant of LED driving light had only just hit the market in 2013. Like us, even the manufacturers around at that time were new to LED. We’re talking about a period when LED bars could barely throw out to 50m, and the lenses were made from glass. On the one hand, it was a great time to enter the market because it wasn’t overly crowded - even the well-known brands had no LED offering. On the other hand, there was a severe lack of manufacturing and design know-how, and the subsequent product quality was way off the mark. Everything that could go wrong went wrong. LED failures, water ingress, housing turning bronze from UV – which all happened more often than it didn’t. We moved from manufacturer to manufacturer, hoping to find one that had stable quality. After wasting a lot of time and money, we assumed that all manufacturers were just as bad as the other, and the only way forward was to work closely with one to co-develop. While we were busy losing money and grappling with the quality issues, the market was getting more & more crowded by the second. We were barely making $10 on a 22” light bar. This was an interesting point in time, as we watched many competitors exit the market. The ones who stayed were looking at ways to cut corners to reduce manufacturing costs. We pivoted in the opposite direction and started looking at ways to improve quality and performance – and that’s when our story really starts.