ST3303 PRO 28.2 INCH 40 LED LIGHT BAR

$924.00 Inc Gst

Available on back-order

NOTE: Items on back order may take 8 – 10 weeks

Description

THE ULTIMATE LIGHT BAR

For almost a decade, the name STEDI has stood for cutting-edge design and market-leading performance. The ST3303-PRO is an aggregation of all things that have made us the globally distributed, coveted brand born right here in Australia.

Unquestionably, ST3303 PRO sits at the pinnacle of the STEDI offering. A pure expression of capability and design that converges with brutal performance, making the all-new ST3303 PRO unmistakably STEDI.

Registered Design: 201915829.

A NEW REALM OF PERFORMANCE

Every good story starts with CREE LEDs. So, we commissioned CREE’s XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn’t sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with tighter source improves the optic and emitter size relationship – We’ve effectively increased the optic diameter by 40% without physically increasing it. The result is huge light volume and tremendous beam throw.

NOW, ARE YOU SITTING DOWN?

Where others stop, we get started. The current draw is enormous, and quite literally unlike anything else on the market. The 60 LED variant draws 36 amp at 13.6v & @ 12.5v 40 amp. Have we got your attention yet? Now, you must, without any exception, we repeat, you must use the heavy-duty, dual relay (yes dual relay!), dual fused wiring harness we supply. The current is so intense, the 40 LED and 60 LED bars have two separate power cables (yes two separate power cables!) on either side of the light bar, and two separate breathers (yep two!) to deal with the enormous current draw.

COLOURS OF EXPRESSION

Commission your own striking colour combination with our customisable side caps. Grey and STEDI orange caps are included, and when you get sick of those, green, blue, and red are available to purchase separately.

YOU SHOULDN’T BUY THE ST3303 PRO

It’s our most expensive light bar ever produced. The price is right up there, and so is the performance. You’re going to need to spend more money to order a pair of high-end sunglasses, or welders mask so that you can safely use this bar while driving at night. If we’re being honest, no one needs a driving light with this level of performance. We only made it because the LED geeks in our team insisted that: “…it would be freakin’ cool”. The type of person that buys a driving light like this has a very strong light fetish and thinks that dropping a Cummins 6.7L in a Daihatsu Charade is adequate and appropriate. If you have ever had the privilege of witnessing the performance of our other bars in our range like the ST4K, you’d probably say “Why on earth does anyone need more light than this” – Well, the ST3303 PRO is precisely that, more.

DETAILS

KEY FEATURES

  • CREE® XLamp XP-L HI undomed LEDs using CREE’s breakthrough SC5 Technology™
  • RFI and EMI suppression circuit. Guaranteed to not interfere with Radio or GPS Equipment
  • IP68 – Submersible to 3m
  • High Current Deutsch DTP-2 25A connectors
  • 32mm diameter parabolic reflectors
  • Spread and Spot beam pattern
  • 4mm thick 304 stainless steel side brackets included.
  • Cast Alloy adjustable sliding bracket included.
  • Nitto Denko™ Breather with PTFE microporous membrane
  • Very heavy-duty Smart Plug & Play ADR compliant Wiring Harness. (Switch, Dual Fuse, Dual Relay and HB3 and H4 Piggyback Adaptors) included

Registered Design: 201915829

SPECIFICATIONS

LED MANUFACTURER CREE XPL Hi
LED COUNT 40
VOLTAGE 9V – 32V
CURRENT DRAW (AMPERES) 25.3a @13.6v
LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN
RAW LUMENS 43,800Lm
EFFECTIVE LUMENS 22,400Lm
PEAK INTENSITY (CANDELA) 656,100cd
HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink
LIFESPAN 50,000
FLOOD BEAM 50°
SPOT BEAM
INGRESS PROTECTION IP68
OPERATING TEMP -40˚C ~ +150˚C
WEIGHT 4.960kg

WHAT’S IN THE BOX

  • ST3303 PRO 40 LED 28.2 Inch Light Bar
  • Easy Fit High Beam Wiring Harness with H4 & HB3 adapters to High Beam
  • 3 x Lower Mounting Brackets with Stainless Steel Fasteners
  • 2 x 4mm thick Stainless Steel Side Brackets
  • 2 x Orange End Caps
  • 2 x Grey End Caps

Additional information

Weight 1.5 kg
Dimensions 250 × 40 × 40 cm

Brand

Stedi

THE VERY HUMBLE BEGINNINGS.

STEDI was founded in 2013 out of the small 290m2 warehouse in Melbourne, Australia, by founders Eddie & Sandra Yilmaz. Back then, the world of the LED driving light was largely novel. The first-ever round variant of LED driving light had only just hit the market in 2013. Like us, even the manufacturers around at that time were new to LED. We’re talking about a period when LED bars could barely throw out to 50m, and the lenses were made from glass. On the one hand, it was a great time to enter the market because it wasn’t overly crowded - even the well-known brands had no LED offering. On the other hand, there was a severe lack of manufacturing and design know-how, and the subsequent product quality was way off the mark. Everything that could go wrong went wrong. LED failures, water ingress, housing turning bronze from UV – which all happened more often than it didn’t. We moved from manufacturer to manufacturer, hoping to find one that had stable quality. After wasting a lot of time and money, we assumed that all manufacturers were just as bad as the other, and the only way forward was to work closely with one to co-develop. While we were busy losing money and grappling with the quality issues, the market was getting more & more crowded by the second. We were barely making $10 on a 22” light bar. This was an interesting point in time, as we watched many competitors exit the market. The ones who stayed were looking at ways to cut corners to reduce manufacturing costs. We pivoted in the opposite direction and started looking at ways to improve quality and performance – and that’s when our story really starts.