Redarc 12V 100A Dual Smart Battery Isolator

$280.60 Inc Gst

Available on back-order

Please Note if Item is on back order it can take 8-10 weeks for it to arrive

Description

The REDARC Smart Start® SBI12D is a microprocessor controlled battery isolator used in a dual battery system. It is designed to be used in dual battery systems as a solenoid priority system to protect the start battery from excessive discharge. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings.

DUAL SENSING

The dual sensing model is used to isolate the start and auxiliary batteries in a system where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI12D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts. This is useful to top up the start battery.

POWER SAVING TECHNOLOGY

The Smart Start SBI12D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.

Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high quality fuse kit.

FEATURES

  • Overmould design
  • Compact in size and easy to install
  • Silver contacts for longer life and suitable for marine applications
  • Power saving technology
  • Fault indication
  • Fully surge protected

Specifications

GTIN_BARCODE 9338628001330
BRAND REDARC
MAX. INRUSH CURRENT 400A
MAX. CONTINOUS CURRENT 100A
TURN ON VOLTAGE 13.2V
TURN OFF VOLTAGE 12.7V
TURN ON DELAY 5 seconds
TURN OFF DELAY 10 seconds
STANDBY CURRENT <5mA
WEIGHT 7 oz (200 g)
HEIGHT 2.48″ (70 mm)
WIDTH 2.95″ (75 mm)
DEPTH | LENGTH 3.15″ (80 mm)
WARRANTY 2 Years
SYSTEM VOLTAGE 12V
OUTPUT VOLTAGE 12V DC
INPUT FUSE RATING 100A
OUTPUT FUSE RATING 100A

Additional information

Weight 50 kg
Dimensions 200 × 50 × 50 cm

Brand

RedArc

Originating in South Australia, but integrated worldwide, REDARC has over 35 years experience in the research, design, development and manufacture of a range of electronic voltage converters and associated products including inverters, power supplies, DC to DC battery chargers and Battery Management Systems, CANBus modules, electric brake controllers, 52mm gauges and customised electronic modules. REDARC’s products are attached to any moving vehicle that uses battery power including cars, boats, rail, trucks, mining equipment, bus and emergency vehicles. REDARC’s goal is to ensure that the REDARC product and service is the benchmark by which the competition is measured. In 2019, REDARC celebrated it’s 40-year anniversary which was not only a celebration of what the business had achieved as a whole, but a celebration of our customers supporting Australian manufacturers.