Description
This kit Suits Toyota Landcruiser 76 Series V8 Diesel
Recommended for vehicles with steel bull bar and carrying loads of 400kg to GVM. Optimum performance will be achieved with loads up to 800kg.
The Toyota LandCruiser 76 Series is a heavy duty wagon with high levels of off road ability and load carrying capability, ideally suited to remote area travel and towing. During development, OME engineers focussed on improving ride comfort, at an increased ride height, whilst maintaining load carrying ability and control.
Along with a new front shock and multiple front spring options to cater for differing vehiclesetups, OME engineers also developed a sway bar spacer kit to maximise shock length and down travel, as well as an upgraded steering damper to reduce steering vibration. An optional upgraded front sway bar is also available to further enhance stability on vehicles regularly carrying heavy loads. With front ride height increases of approximately 50mm, a caster correction kit, which maintains factory steering geometry, was also developed.
Rear ride height increases of approximately 50mm maintain the factory vehicle rake and a range of rear springs, with matching shocks and greasable shackles & pins, provide multiple options depending on the intended loads to be carried. An XL leaf has also been developed to assist with fine tuning the weight carrying capacity and matching spring bush kits ensure ease of service and increased bush life.
COMPONENTS IN THIS KIT INCLUDE:
- Front Coil Springs (1 pair x 2859)
- Leaf Springs (2 x CS058R)
- Front Nitro Plus Shock (2 x 63008)
- Rear Nitrocharger Plus Shock (2 x 63010)
- Steering Damper (1 x OMESD47)
- Greasable Shackle Kit (1 x OMEGS19)
- Greasable Pin Kit (1 x OMEGP7)
- Spring Bush Kit (2 x OMESB85)
- U Bolts (4 x OMEU59D)
- Sway Bar Spacer Kit (1 x FK19)
- ABS Wire Bracket (1 x FK65)
- Castor Correction Kit (OMECA77B)
- Relocation Kit Brake Porportioning Valve (FK51)
OPTIONAL EXTRAS:
- Extra Leaf
- Panhard Rod Extension Bkt
- Rear Sway Bar
- Shock Absorber Stone Guard Kit
- Upgraded Front Sway Bar
IF REQUIRED:
- Anti Inversion Kit
ESTIMATED LIFT:
- Front: 50MM
- Rear: 50MM
Photo is Generic
Price does not include installation or freight
DISCLAIMER: IT IS THE PURCHASER’S RESPONSIBILITY TO ENSURE ALL PRODUCTS AND THE INSTALLATION THEREOF MEET CURRENT LVV REQUIREMENTS, WHERE APPLICABLE.
